Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

Worm holes
http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=43548
Page 1 of 1

Author:  Mike OMelia [ Wed May 28, 2014 8:27 pm ]
Post subject:  Worm holes

What do you guys do to plug/hide worm holes?

Author:  gozierdt [ Wed May 28, 2014 8:30 pm ]
Post subject:  Re: Worm holes

On dark woods, I usually fill them with a black epoxy mix. On lighter woods, with epoxy with sanding dust
from that wood mixed in. I'm not trying to hide them, as I feel they are a natural part of the wood, just
filling them with something to create a smooth surface for the finish.

Author:  Mike OMelia [ Wed May 28, 2014 8:40 pm ]
Post subject:  Re: Worm holes

Yes, that's the approach I was planning. I just want to make sure I understand all of the issues. These are 1mm pin holes

Author:  jfmckenna [ Wed May 28, 2014 8:57 pm ]
Post subject:  Re: Worm holes

I just give Neil DeGrasse Tyson a call.

--

1mm is a good size.

Author:  Mike OMelia [ Wed May 28, 2014 9:47 pm ]
Post subject:  Re: Worm holes

Ya know, it never occurred to me that I was talking about astrophysics :)

Author:  Michiyuki Kubo [ Thu May 29, 2014 5:19 am ]
Post subject:  Re: Worm holes

Are we talking dark matter here? Or light particles ? Hehe

Author:  Quine [ Thu May 29, 2014 7:13 am ]
Post subject:  Re: Worm holes

I just use CA glue. It stays clear and you can get your spaceship though it

Author:  B. Howard [ Thu May 29, 2014 7:26 am ]
Post subject:  Re: Worm holes

Often I use this in the appropriate flavor.
http://www.rockler.com/famowood-wood-fi ... iller-6-oz
Or sometimes I will use a burn in stick.

Author:  mkellyvrod [ Thu May 29, 2014 7:46 am ]
Post subject:  Re: Worm holes

I simply don't fill them, and I'm not big on pore filling either. I've got several in the ambrosia maple guitar I built and have a couple of nice ones in the imbuia build that I'm working on right now. I suppose I might rethink this if I were trying to sell them, but my guitars are made as gifts, and the worm holes give them character in my opinion (micro-soundports).

Now could someone explain string theory?

Author:  Mike OMelia [ Thu May 29, 2014 8:56 am ]
Post subject:  Re: Worm holes

Micro-soundports. A feature. :)

Now that think about it, the epoxy pore fill will probably get them just fine.

Its amazing how wormholes and string theory go with guitars.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/